A Table Top Scale, – is a small scale that can fit on top of a work station or 'work bench'. Electronic table top scales from E. G. Kantawalla are used for smaller weighing needs and more intricate processes, where the operator needs to be closer to the scale itself. Table top scale applications range from simple weighing, mixing, counting and weight accumulation.
The TITAN - C compact scales range offers a wide choice to meet almost every requirement. Large, bright displays and a large SS304 weighing pan ensure comfortable user operation.
A Table Top Scale, – is a small scale that can fit on top of a work station or 'work bench'. Electronic table top scales from E. G. Kantawalla are used for smaller weighing needs and more intricate processes, where the operator needs to be closer to the scale itself. Table top scale applications range from simple weighing, mixing, counting and weight accumulation.
The TITAN - C compact scales range offers a wide choice to meet almost every requirement. Large, bright displays and a large SS304 weighing pan ensure comfortable user operation.
| Model | Capacity | Readability |
|---|---|---|
| Titan-C | 5/7.5 kg | 0.5/1 g |
| Titan-C | 10 kg | 1 g |
| Titan-C | 10/20 kg | 1/2 g |
| Titan-C | 20/30 kg | 2/5 g |
| 1 | Physical Dimension – 256.5 x 266.5 x 121 mm |
| 2 | Net Weight – 2.4 kg approx. |
| 3 | Weight Sensor – Aluminium Loadcell |
| 4 | Input range of loadcell – 0 to 10 mV |
| 5 | Resolution – 1/10000 |
| 6 | Keypad – 5 keys |
| 7 | Display Type – Custom LCD Display with Backlight |
| 8 | No. of Display Windows – Dual Display (Front & Rear) |
| 9 | Front Display – LCD – 25 mm digit height |
| 10 | Rear Display - LCD - 25 mm digit height |
| 11 | Calibration Method - External Calibration |
| 12 | Power Connector - 3 pin Adaptor - Type C - 5 V, 1 A |
| 13 | Power Supply - 110 to 230 V AC 47-63 Hz |
| 14 | Operating Temperature - 0 deg to 50 deg |
| 15 | Battery Capacity - Lithium Ion - 7.4 V, 1200 mAh |
| 16 | SI Units - g, kg, l (Liter) |
| 17 | Communication Interface - RS232 |
The Pan MOC is of SS 304 & Pan size is 250 x 195 mm.
of LED?
10 kg x 1 g and 20/30 kg x 2/5 g
RS232 port.
through RS232?
Below are the devices can be connected to Titan:
(At a time any one can be connected)
through RS232 to the computer?
+001.000 kg (For example, if 1 kg is kept in the weighing scale)
to PC?
Yes we can transmit 001.000 only (For example, if 1 kg is kept in the
weighing scale)
*Leading zero before 1.000 can also be disabled in the settings is required.
Front & Rear Display size : 128 x 32 mm
Digit Size : 25 mm
Digit Size : 25 mm
*This display size and digit height are common for Front & Rear display.
Charging time for both Titan Table Top models : 3 hrs approx.
Discharging time for Titan Table Top – LCD model is 11 hrs approx.
Discharging time for Titan Table Top – LED model is 12 hrs approx.
*These are tentative time duration based on testings.
Yes, this scale can be operated using lithium ion battery
(7.4V, 1200 mAH)
Yes, we can provide IQ, OQ, PQ, DQ documents on demand, if the
customer is in need of these documents than please mention it in the
sales order.
Retail shops, Industries etc.
Industrial ABS Plastic.
No.
g, kg, L.
Pin 1 : Ground
Pin 2 : RX
Pin 3 : TX
* We use 3 pin round connector.
Titan Table Top scale can print 3 print formats.
Print Format 1 (FOR1) : Common for receipt paper and label paper
Print Format 2 (FOR2) : Common for receipt paper and label paper
Print Format 3 (FOR3) : Only for receipt paper (Accumulation mode)
*Accumulation can be done till display reaches 999999 and 999 times
we can accumulate. After that accumulation memory has to be cleared.
No. The font size, font type, alignment are fixed and factory set.
This is because Titan Table Top don’t have the RTC.
Accumulation is possible only in simple weighing mode.
Yes unit conversion is available for kg-g/g-kg/kg-L/L-kg/g-L/L-g
Tare + N/G key has to be pressed simultaneously for unit conversion and unit
conversion is only to view the converted values and functions like zero, tare,
print etc will not work when the unit is converted. After few seconds, the
display will return to the default scale unit.
No.
Up to 9 copies. But we have to enter the no. of copies to be printed in the
settings. This is applicable for print format 1 and 2.
We can use RD-DN-40 S and TVS RP45 dot matrix printers for the receipt print.
But for label only RD-EK32 S has to be used.
(These printers are external table mount printers)
| Download Product Catalogue | ||
| Download User Manual | ||
| Model Approvals II | ||
| Model Approvals III | ||
| Download Dimensions | ||
| Download FAQ | ||
| Download Communication Protocol form | ||
| Download Communication Protocol form | |
| Demo VIdeo | |
| Note | RS232 communication cable is optional; not included in the standard scope of supply. |